ECA4-MX
MX Series
ECA4-DX
DX Series
ECA4-EX
EX Series
ECA4-FX
FX Series
ECA4-MX
VW Series


  ECA logo Overview  
HIGH-PERFORMANCE WORKSTATION
Client Computer
VW44
get_app Download Datasheet
ECA-EX44 Specification
Hardware
Storage 1 unit internal 256GB SSD dedicated for OS & VMS Software use.

Two (2) internal 3.5inch SATA HDDs bay for dedicated video backup support up to 18TB capacity per HDDs.
Monitor Outputs VW44A4C, VW44i4C, & VW44E4C model:
Onboard: Intel® UHD Graphics 630. 1GB shared memory
HDMI x 1port. Ver 2.0a. Max Resolutions 4096x2160 @60Hz (4K)
DP x 1port. Ver 1.2. Max Resolutions 4096x2160 @60Hz (4K)
VGA x 1port. Max Resolutions 1920x1200 @60Hz

High Performance Series VW44E5C and VW44P5C model:
Dedicated Graphic:: nVidia Quadro P620 with 2GB DDR5 128bit memory.
Mini DP x 4. Ver 1.4. Max Resolutions 4096x2160 @60Hz (4K)
Multi Display Support: 6 monitors
Support 6 HDMI at 4K outputs (with optional adapter)
Designed for Video Wall Matrix.
Display Performance Client mode. Display in single machine.
VW44A: 50CH live display.
VW44i: 63CH live display.
VW44E: 63CH live display.
VW44P: 150CH live display.
Details Report: http://gsf.ms/LB202104210944.pdf
Monitor Outputs HDMI x 1port. Ver 2.0a. Max Resolutions 4096x2160 @60Hz (4K)
DP x 1port. Ver 1.2. Max Resolutions 4096x2160 @60Hz (4K)
VGA x 1port. Max Resolutions 1920x1200 @60Hz

Multi Display Support: 3 monitors
Processor VW44A: Intel® Core i3-10100. 4 core 8 threads.
VW44i: Intel® Core i5-10400. 6 core 12 threads.
VW44E: Intel® Xeon W-1250. 6 core 12 threads.
VW44P: Intel® Xeon W-1270. 8 core 16 threads.
VW44W: Intel® Xeon W-1290. 10 core 20 threads.
Memory 4C / 4S: DDR4 16GB
5C / 5S: DDR4 32GB

NOTE: VW44E & VW44P come with ECC system memory.
Network Dual LAN (RJ45 connector) 10/100/1000 Base-T Gigabit Ethernet. Support Redundant Fail-over.
LAN1: Intel® I225LM with 10/100/1000/2500 Mbps
LAN2: Intel® I219LM with 10/100/1000 Mbps.
Audio Realtek ALC887 HD , High Definition Audio.
Line-out. 3.5mm jack (green).
Mic-in. 3.5mm jack (pink).
Support Audio over HDMI and DP
Heartbeat System on chip (SoC) microprocessor IoT controller board
32GB system recovery heartbeat storage.
12 hours self sustained 6000mAh Li-Po battery.
100Mbps LAN for system notifications.
Relay-Out x 1. (NC/NO/COM), for machine failed buzzer.
Programmable Digital I/O: DI x 2. DO x 2. 3.3V@500mA max.
Security Key 2048-bit RSA encryption.
Uniquely paired to machine specific authenticator token.

Physical Key Type: USB 2.0 Type-A.
Virtual Key Type: 6 digit OTP access code. Refreshed every 30 seconds
Software
Operating System (OS) Triple layer ecaOS version 5.2 64bits OS architecture powered by Microsoft® Windows 10 Enterprise LTSC

Protection: Built-in SHIELD™ technology, write protected OS.
Recovery Step: SOFT and HARD reset
Recovery Layer: FACTORY and DEPLOYMENT layers
App Monitor User configurable: ADD, DEL application monitoring watchdog.
Type: Application or Script (support arguments command)
Lunch Delay: First execution delay for x seconds (user configurable)
Instance: Force single terminate the rest, or allow multi instance.
Monitoring: Terminate App if no respond.
Auto Respawn: Auto respawn app/script after close or terminated.
System Recovery FAST RESET: Reboot from windows OS, load fresh ecaOS from SSD (SHIELD must be enabled). This reset recovered most daily operation errors like miss places settings, or trojan attacks. Recovery time about 1 minute.

SOFT RESET: Command by Security Key, perform by Heartbeat. This reset recover the whole ecaOS, and it solve problem like windows OS corrupted or changes or change of new SSD. Recovery time about 10 minutes.

HARD RESET: Same as soft reset, but recovery based on factory default without any user software and settings.
System Monitoring CPU: Usage (%) threshold value for x minute of time
MEMORY: Usage (%) threshold value for x minute of time
NETWORK TX/RX: Usage (Mbps) threshold value for x minute of time
DISK WRITE/READ: Usage (Bytes) threshold value for x minute of time

• With automatic value prediction
• With notification and email alert
• Optional action to reboot or shutdown the machine (CPU and Memory)

Machine shutdown authorization: Security Key only
Machine stability monitoring: Notify if reboot more than 3 times within 30 minutes. Auto reboot if system halt / blue screen.
AC power monitoring: Alert & log if unexpected AC power lost, auto power up when AC power resume.
Disk Health Frequency of health check: Automatic daily.
Disk Check: OS SSD and 2 internal HDD.
Notification: Email alert with detail disk health information.
Disk Health: Disk health %, Power on time, Temperature, S.M.A.R.T values analysis. SSD ware, HDD bad sector, etc.
Disk Guard Automatic log and notify when disk was REMOVED or ADDED.
Track all individual HDD SERIAL NO. for evidence trace.
Disk Info: Serial number, Firmware version, Model number, Controller information and Partition details.
Electrical
Power Input & Consumption Line voltage: 100 - 240V AC (auto select)
Frequency: 50-60Hz, single phase
Power output rated: 600W (max)
Power Efficiency: >82% 80PLUS rated.
Continuous power consumption for UPS calculation
Platform Only: 60W
Platform with 02 HDD: 100W.
Power Protection & Safety Over Voltage Protection (OVP)
Short Circuit Protection (SCP)
Over Power Protection (OPP)
Over Current Protection (OCP)
Under Voltage Protection (UVP)

PSU will automatic shutdown if fault above detected.
RESET: Remove all fault, with AC input cycle ON/OFF reset > 3seconds.
Environmental
Operating Temperature Operating Temperature: 10 ~ 45 °C
Storage Temperature: -40 ~ 65 °C
Humidity Operating Humidity: 10% ~ 85% (Non-condensing)
Storage Humidity: 10% ~ 85% (Non-condensing)
Dimension & Weight
Size & Weight Machine Only:
Depth : 465mm
Width : 430mm
Height : 176mm
Weight: 13.1KG

Packaging Box: 
Depth : 600mm 
Width : 560mm 
Height : 295mm 
Weight: 18.5KG
Form Factor & Mounting Requirements Rack mounted 4U
Come with rail mounting kits.

Rail mount requirement: Minimum vertical mounting column front to back is 600mm depth.
Desktop mount with footer inclusive.
Service & Warranty
Warranty Support & Customer Care 1 year standard manufacturer warranty. Carry-IN.

TrueBlue Care: Upgrade to 3 years hardware warranty, with next business day carry-IN part replacement service. (Service Code: TBC)

TrueBlue Care Premium: Upgrade TBC to TBC Premium with Hardware parts & labour onsite replacement (TBC Premium)

During warranty customer care:
• Phone and Email Support (During working hour only)
• Remote Support (During working hour only)
TrueBlue® Service TrueBlue TNC (Service Code: TNC)
Deployment Service: Professional onsite testing and commissioning.
Training: User operation training.

TrueBlue Onsite (Service Code: TBO)
Incident based pay-per-request onsite service support.
 
TrueBlue Maintenance (Service code: TBM)
ECA preventive maintenance service. We recommend a minimum 1 year service interval for each ECA deployed.
Models & Configurations
ECA-VW44PMO-10HSXXXSSSSSS ECA-VW44: Generic ECA Platform 4.4

Configuration (Processor): P
A: Intel® Core i3-10100. 4 core 8 threads.
i: Intel® Core i5-10400. 6 core 12 threads.
E: Intel® Xeon W-1250. 6 core 12 threads.
P: Intel® Xeon W-1270. 8 core 16 threads.
W: Intel® Xeon W-1290. 10 core 20 threads.

Configuration (RAM): M
3C: DDR4 08GB
4C / 4S: DDR4 16GB
5C / 5S: DDR4 32GB
Model with Xeon processor installed with ECC memory.

Configuration (OS): O
C: Windows 10 Enterprise LTSC OS
S: Windows Server 2019 OS

Configuration (Storage): 00HSXXX
0 Hot swap Bay, with XXX factory pre-installed HDD capacity.

Configuration (Software): SSSSSS
Factory pre-loaded software code.






Solving Your NVR Problems.
GSF can help you overcome common NVR issues such as performance, stability, and miss-use, as well as technical and integration problems.

Call us.

+603-8090 8080

E-mail us.

info@gsf.com.my